1 、Chinese and English operaion interface

2 、30varieties can be setted.

3 、Each variety can be divided into 1~5large steps,and each step can set the dough thickness 15 times.

4 、After setting the dough thicknesses of each variety,it will be automatically uploaded tothe computer.Itis only necessary to retrieve the serial number in the later operation.

5 、The machine has two modes of operation

1 、Automatic mode:Advance set the dough to stop on the left or right side of the machine by using the touch screen,pressthe start button after folding the dough.(The operator only needs to stand on one side of the machine)

2 、Manual mode:Press the start button to run let or right.

6 、Automatic Sprinkle flour function:it can be selected tosprinkling flour or not at the large steps of each formula.It is very user-friendly,avoiding the dough sticks to the rolling pin after the operator forget to sprinkling flours.

7 、Roll up dough function:After point the roll up dough function button,each dough is automatically rolledonto the rolling pin whenthe process is finished.

8 、Adopting the thread reversing principle,the commutation is gentle,the mechanical operation is powerful and no noise.

9 、Alltransmission parts are driven by high-frequency quenching sprocket and imported chain,which willno slip.The reversing bearing is imported from Germany

10 、The upper and lower scrapers are all made offood grade materials.The dough do not stick the surface ofthe upper and lower pressing

rollers.The cleaning is simple and convenient.The upper and lower scraper surfaces do not see any screws and will not scratch the dough.

11 、The pressing surfacelifting roller adopts the connecting rod synchronizing device,which avoids the phenomenon that the gap between the upper and lower pressing rollers is different.

12 、The conveyor belt can be freely disassembled without opening the main machine.The biggest advantage is that when the outermost roller of the conveyor belt is lifed up,the conveyor belt is in a relaxed state.After cleaning the flour on both sides of the roller,it can be put down.

13 、The whole maching does not have any hollow pin fixing to avoid the failure and repair time caused by the breakage of the hollow pin.

14 、All electrical sensors,touch screens,PLC,servo motors,inverters,are purchased from Japan of Taiwan to effectively ensure the stability of equipment.